Chandelier Hoist General Information:

The hoist is designed with simplicity in mind. It is slim, fairly light (depending on model), has a steel base plate, making it sturdy and solid and is a completely integral unit. There are no ‘loose’ components, the wire rope cable drum is internal and there is no lowering of or coiled electric cable.

Your hanging fixture is plugged in when fully raised and unplugged when lowered, making it safe to work on when in the lowered state. Power will not be supplied to the hanging fixture until the connector plate is in its fully raised position. When the connector plate is fully raised it will auto-stop and a safety locking pin will enable, to hold the weight of the hanging fixture, ensuring the wire rope is not under permanent strain.

It is designed to be installed either:

1) Flush to the ceiling and in view, where you may find the separately sold hoist cover plate useful to provide a cosmetic cover.

or

2) Hidden in a void space such as, in between floors, in an attic/loft or in a false ceiling.

The hoist is controlled by a simple two button remote.

Back To More Product Information