Remote controlled ch...

»

Here To Help

»

Web Store Help

»

Frequently Asked Que...

»

Hoist Troubleshootin...

»

P2. If your hoist works (e.g. lifts/lowers) but you’re hanging fixture doesn’t:

P2. If your hoist works (e.g. lifts/lowers) but you’re hanging fixture doesn’t:

  • Check how you have connected your hanging fixture to the connection plate.
    • Your fixture needs to connected to the ‘N’ male connector and
    • Preferably ‘L2’ or both ‘L1 and L2’.
  • Ensure your connectors, on the connection plate, are firm and secure. Crimp them tightly. During rising and lowering the connectors may otherwise work loose.
  • Have you wired the black connection block (figure 2) accordingly. If you have attached your fixture to L2 on the connection plate, L2 on the block needs wiring. If you have attached it to ‘L1 and L2’ then you need to supply and keep supplied, ‘L1 and L2’ on the connector block.

Back To Hoist Troubleshooting FAQ's

Your Basket
It's empty!
Free Global Delivery
(except where explicitly stated)
This site and all contents are ©2010 Bonds Hoists Ltd
Email: info@bondshoists.com   Telephone: 0845 365 1 007