Remote controlled ch...

»

Here To Help

»

Web Store Help

»

Frequently Asked Que...

»

Hoist Troubleshootin...

»

P4. IMPORTANT if you are working with multiple units:

P4. IMPORTANT if you are working with multiple units:

  • Trying to get a single remote to operate all units will not work.
  • DO NOT attempt to lower multiple hoists at the same time using one remote - you will encounter problems.
  • DO NOT attempt to connect a single object to multiple hoists. The hoists will not lift evenly and the load will therefore not be spread evenly – leading to extra load on individual units. A shift in the centre of gravity to a point which isn’t directly below a unit may also create undue stresses on the unit, shortening its life expectancy.
  • BE AWARE when trying to retune a remote that you are only working with one hoist. Power down all the hoists you are not working with and work with one hoist at a time.
  • IF POSSIBLE only attempt to lower one hoist at a time, unless you are sure that they are far enough apart that individual remote signals will not be ‘picked up’ by both hoists.

Back To Hoist Troubleshooting FAQ's

Your Basket
It's empty!
Free Global Delivery
(except where explicitly stated)
This site and all contents are ©2010 Bonds Hoists Ltd
Email: info@bondshoists.com   Telephone: 0845 365 1 007