Programming of this remote into your unit is simple and easy and should take approximately 30 seconds.

To program your new remote into your hoist:

Ensure there is a working battery in the remote;
Turn off the power to your hoist;
Turn the power back on to your hoist;
Within 10 seconds of powering up - hold down both buttons on the remote;
Hold buttons for ten seconds and release;
Your new remote should now operate your hoist.

If purchasing a second remote with your hoist we will test to ensure this works correctly.

If purchasing an additional remote after your hoist has been dispatched we cannot guarantee the remote will work with your hoist as some work on slightly different signals. It is advised to purchase 3 remotes and return unwanted ones.
The latest remote control is product code: ANR 3